Solution for "file.c:259 ast_writestream: Translated frame write failed"

Solution for file.c:259 ast_writestream: Translated frame write failed and channel.c:5582 ast_write: Failed to write data to channel monitor write stream

Add 1,Answer into the extension.conf context.

;incoming to Agent

exten => _X.,1,Answer()
exten => _X.,n,AGI(agi-DID_route.agi)
exten => _X.,n,Hangup()

; custom dialplan entries of TATA SIP TRUNK for call recording from Ext Phone
exten => _9X.,1,Answer()
exten => _9X.,n,AGI(agi-NVA_recording.agi,BOTH------Y---Y---Y)
exten => _9X.,n,SipAddHeader(P-Preferred-Identity:<sip:001234567890@10.60.19.16:5061>)
exten => _9X.,n,Set(CALLERID(num)=${CALLERID(num)})
exten => _9X.,n,Progress()
exten => _9X.,n,Dial(SIP/${EXTEN:1}@TATASIP,50,tToR)
exten => _9X.,n,Hangup

;Incoming to default log
exten => _X.,1,Answer()
exten => _X.,n,AGI(agi-NVA_recording.agi,BOTH------Y---Y---Y)
exten => _X.,n,Goto(default,${EXTEN},1)

Comments

Vicidial Scratch installation Alma -9

Step 1 – Download the dependencies hostnamectl set-hostname xxxxxx.xxxxx.xxx ### Use YOUR SubDomain vi /etc/hosts ##Change domain name for actual server ip (xxx.xxx.xxx.xxx complete domain name subdomain only) timedatectl set-timezone Asia/Kolkata yum check-update yum update -y yum -y install epel-release yum update -y yum install git -y yum install -y kernel* sudo dnf install kernel-devel-$(uname -r) -y #Disable SELINUX sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config reboot Step 2 – Run the Script cd /usr/src/ git clone https://github.com/manish23k/vicidial-install-scripts cd vicidial-install-scripts chmod +x alma-rocky9-ast16.sh ./alma-rocky9-ast16.sh Or the Asterisk 18 version: chmod +x alma-rocky9-ast18.sh ./alma-rocky9-ast18.sh ####For PHP 8 use this script. chmod +x main-installer-php8.sh ./main-installer-php8.sh

How to delete old call logs and other logs in vicidial or goautodial.

Step 1 : SSH to the server using the Putty Step 2: login to mysql by typing mysql -p (if you dont know password try below command ) mysql -ucron -p1234 Step 3 : select the asterisk database by typing use asterisk step 4: Run the below command to check total disk occupied by asterisk database SELECT table_schema AS "asterisk", ROUND(SUM(data_length + index_length) / 1024 / 1024, 2) AS "Size (MB)" FROM information_schema.TABLES GROUP BY table_schema; Step 5 : Run the below command to check disk space consumed by each table in asterisk database SELECT table_name AS "Table", ROUND(((data_length + index_length) / 1024 / 1024), 2) AS "Size (MB)" FROM information_schema.TABLES WHERE table_schema = "asterisk" ORDER BY (data_length + inde...

Install the No-IP client (Dynamic Update Client) on AlmaLinux 9

Install the No-IP client (Dynamic Update Client) on AlmaLinux 9 1. Install Required Packages First, install the necessary packages to compile the client from source. sudo dnf install gcc make wget tar 2. Download the No-IP DUC (Dynamic Update Client) Download the latest version of the No-IP DUC. cd /opt wget https://www.noip.com/client/linux/noip-duc-linux.tar.gz 3. Extract the Downloaded File Extract the downloaded tarball. tar -zxvf noip-duc-linux.tar.gz cd noip-2.1.9-1/ 4. Compile the Client Run the following commands to compile the client. sudo make install 5. Configure the No-IP Client After installation, you’ll be prompted to enter your No-IP account credentials (email and password) and choose the hostname(s) to update. If not, you can manually run the configuration: sudo /usr/local/bin/noip2 -C 6. Start the No-IP Client To start the client: sudo /usr/local/bin/noip2 7. Verify Installation To confirm that the No-IP DUC is running, use: sudo /usr/local/bin/noip2 -S 8. Set Up...

MANISH K

Search This Blog