Skip to main content

Installation of CaudalFin E1/T1/J1 (PRI) Cards

Installation Sequence

1.CaudalFin DAHDI Drivers

Copy CaudalFin DAHDI Drivers to /usr/src folder Extract the tar file using the following command
$tar –zxvf dahdi-linux-complete-X.X.X+X.X.X.tar.gz
Go to the Extracted Dahdi directory by using the following command
$cd dahdi-linux-complete-2.6.1+2.6.1
Use the following commands to install CaudalFin DAHDI drivers:
1.$make clean
2.$make distclean
3.$make all
4.$make install
5.$make configure
6.$ dahdi_genconf
7.$dahdi_genconf modules

2.Installation of libpriTo install libpri first you have to download the latest version of LibPri.

Substitute the version of libpri for the X.X in the command given bellow.
To download latest version of LibPri give the following command.
$ wget http://downloads.asterisk.org/pub/telephony /libpri/libpri-X.X-current.tar.gz
After downloading LibPri extract the LibPri tar file by the command given below.
$ tar -zxvf libpri-X.X-current.tar.gz Install the LibPri by following the commands given below:
1.$cd libpri-X.X/
2.$make clean
3.$make all
4.$make install

3.Installation of AsteriskAfter installing the latest version of dahdi and libpri download the latest release version of Asterisk,

either 1.4.22 (or later) or 1.6.0.1 (or later).
Substitute the version of Asterisk for the X.X in the command given below.
Asterisk is available for download from:
Index of /pub/telephony/asterisk or you can directly download from command line by giving the following command:
$wget http://downloads.asterisk.org/pub/telephony /asterisk/asterisk-X.X-current.tar.gz
After downloading asterisk, extract the asterisk tar file by giving following command.
$ tar -zxvf asterisk-X.X-current.tar.gz To install asterisk give the following commands:
1.$ cd asterisk-X.X/
2.$ make clean
3.$ . /configure
4.$ make menuselect
5. $ make
6.$ make install
7.$ make samples

4.Completing the Installation

1.$ dahdi_genconf
2.$ dahdi_genconf modules
3.$ killall asterisk
4.$ service dahdi stop
5.Service dahdi start
6.Asterisk
7.Asterisk -vvvvvr

 

Comments

Post a Comment

Popular posts from this blog

Vicidial Scratch installation Alma -9

Step 1 – Download the dependencies   hostnamectl set-hostname xxxxxx.xxxxx.xxx ### Use YOUR SubDomain vi /etc/hosts ##Change domain name for actual server ip (xxx.xxx.xxx.xxx   complete domain name    subdomain only) timedatectl set-timezone Asia/Kolkata yum check-update yum update -y yum -y install epel-release yum update -y yum install git -y yum install -y kernel* sudo dnf install kernel-devel-$(uname -r) -y #Disable SELINUX sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config     reboot Step 2 – Run the Script cd /usr/src/ git clone https://github.com/manish23k/vicidial-install-scripts cd vicidial-install-scripts ####For PHP 7.4 use this script. chmod +x alma-rocky9-ast16.sh ./alma-rocky9-ast16.sh Or the Asterisk 18 version: chmod +x alma-rocky9-ast18.sh ./alma-rocky9-ast18.sh ####For PHP 8 use this script. chmod +x main-installer-php8.sh ./main-installer-php8.sh
Post a Comment
Read more

How to delete old call logs and other logs in vicidial or goautodial.

Step 1 : SSH to the server using the Putty Step 2:   login to mysql by typing   mysql -p                    (if you dont know password try below command )               mysql -ucron -p1234 Step 3 : select the asterisk database by typing               use asterisk step 4: Run the below command to check total disk occupied by asterisk database                SELECT table_schema AS "asterisk", ROUND(SUM(data_length + index_length) / 1024 / 1024, 2) AS "Size (MB)" FROM information_schema.TABLES GROUP BY table_schema; Step 5 : Run the below command to check disk space consumed by each table in asterisk database SELECT table_name AS "Table", ROUND(((data_length + index_length) / 1024 / 1024), 2) AS "Size (MB)" FROM information_schema.TABLES WHERE table_schema = "asterisk" ORDER BY (data_length + inde...
Post a Comment
Read more

Alma 9 Vicidial Selfsign Webrtc

I am going to provide step by step guide to integrate, enable and configure the viciphone(a webrtc phone) in vicidial (also applicable to any vicidial based system) using the Self Signed SSL Certificate ,ie without a public-ip and FQDN or accessing the vicidial with internal LAN IP. 1️⃣ Install OpenSSL (if not installed) sudo dnf install -y openssl 2️⃣ Generate a Private Key openssl genpkey -algorithm RSA -out selfsigned.key -pkeyopt rsa_keygen_bits:2048 3️⃣ Create a Certificate Signing Request (CSR) openssl req -new -key selfsigned.key -out selfsigned.csr It will prompt you for details like: Country Name (e.g., IN ) State or Province (e.g., Gujarat ) Locality (City) Organization Name Common Name (Domain, e.g., example.com or your server IP) Email Address You can use localhost or an IP address if needed. 4️⃣ Generate a Self-Signed Certificate openssl x509 -req -days 365 -in selfsigned.csr -signkey selfsigned.key -out selfsigned.crt -days 365 → Valid for 1 year (Adjust as needed) ...
Post a Comment
Read more